Description

Replacement Strat® guitar neck, 70’s style.

21 medium jumbo frets.

12″ inch radius.

43mm width at nut slot.

10mm diameter tuning machine holes.

Clear gloss finish.

Trussrod adjustment at headstock.

Maple neck with Rosewood fingerboard.

Please note that this Strat® guitar neck comes completely fretted and with the nut slot already cut. However, the nut itself does not come with the neck and needs to be ordered separately. Neck mounting holes are not drilled.

The tuning machine holes are drilled to take contemporary tuners such as Grover, Sperzel, Gotoh. For vintage Kluson tuners or similar, a set of MB65N-L or MB65G-L adapter bushings will need to be purchased.

All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. Armstrong Music does not sell what is commonly referred to as seconds or blems. Due to the volume of necks that we sell Armstrong Music does not hand-select necks based on appearance or weight. Armstrong Music neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required.

Armstrong Music recommends that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop.

Important Information –
Width of neck at nut slot – 43mm
Width of neck at heel (where it joins the body) – 56mm
Diameter of tuning holes – 10mm