Description

DeoxIT®, D100W-3X3 (Wipes, 3.0 x 3.0), 100 wipes

Part No. D100W-3X3: (100 counts)
100% Liquid, No solvents

Applicator: Cotton Wipes, 3.0 x 3.0, provides NO flushing action, applies 100% DeoxIT®.
Formulation:   100% DeoxIT®.
Use: When contact and connector are easily accessible. Provides wiping action wipe with the grain recommended. No flushing action. 
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection.  Wipe off and re-apply DeoxIT®.

DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates, and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts, and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% cleaning action.

KEY FEATURES:

Improves Conductivity

Deoxidizes, Cleans, and Preserves

Reduces Intermittent Connections

Reduces Arcing & RFI

Reduces Wear & Abrasion

* Temperature Range, -34 C (-29 F) to +200 C (400 F)

NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer